How to clean the panic exit device and how to do it

The panic exit device is an excellent locking device for emergency exit doors in supermarkets, shopping malls, hospitals, schools, and other establishments. However, without regular cleaning, the overall aesthetics of the device will be affected and the hotel will be downgraded, which is a very bad experience for the user. So how do you keep the luster on the surface of the panic exit device for a long time? Here's how to clean the fire panic exit device and how to do it! Here are some answers.

Here is the content list:

l Six cleaning methods and tips for panic exit devices.

l Detailed cleaning steps for the panic exit device.

Six cleaning methods and tips for panic exit devices.

Firstly, if there is dust or dirt on the surface of the panic exit device, use soap, weak detergent, and warm water to clean it. Second, the surface is affixed with logos and films, clean with neutral detergent, and scrub very sticky adhesives with alcohol or organic solvents. Thirdly, surfaces contaminated with grease or lubricants should be cleaned with a soft cloth and then with a neutral detergent, ammonia solution, or special detergent. Fourth, if the hotel panic exit device has acid attached, it should be immediately rinsed with water, then rinsed with ammonia or neutral sodium carbonate aqueous solution, then rinsed with neutral or lukewarm water. Fifth, panic exit device surface with rainbow lines, is due to excessive use of detergent or grease caused by the use of lukewarm water neutral washing pair. Sixthly, if the surface of the cinema panic exit device is rusty due to dirt, it can be cleaned with 10% nitric acid or abrasive detergent, or with a special detergent.

Detailed cleaning steps for the panic exit device.

Firstly, use an all-purpose cleaner, glass water, or detergent with a damp towel to clean the surface of the stainless steel from watermarks, dust, and oil. Secondly, use a clean, lint-free towel to dry off the water. Thirdly, to oil the panic exit device, clean it first, put the stainless-steel oil in a small spray bottle and spray it on the towel or stainless-steel surface, following the grain of the shopping mall panic exit device, and apply an even layer. Fourthly, after the oil has been applied, a clean, lint-free cloth should be used to wipe lightly along the grain a few times to remove the thick oil and some of the lint to keep it shiny.

Our official website is /. If you work with panic exit devices or would like to know more about our company, you can talk to us on the website. Our company philosophy is "integrity, hard work, quality, responsibility", that is, quality first, customer first, first-class service, integrity-based, smile to meet the challenge, sincere service to every customer! Our company adheres to the enterprise culture of "quality-oriented, customer first", and always makes unremitting efforts to become a professional airport panic exit device supplier in the industry.